Maruti Suzuki

private job maruti suzuki

Maruti Suzuki India Limited, formerly known as Maruti Udyog Limited, is an Indian automobile manufacturer based in New Delhi. It was founded in 1981 and owned by the Government of India until 2003, when it was sold to Suzuki Motor Corporation. As of July 2018, it had a 53 percent market share in the Indian passenger car market.

Press Dies Fitting, Assembly & Trials

Job ID
18255

Job Type
Full-time

Location
Gurugram, Manesar

Experience
5 – 9 Years

Business Unit
Production Business Verticle

Organization
PLSFHR

Job Posted Date
September 3rd 2021

Job Description

  1. Development of press panel parts as per project schedule.
  2. Shift handling & manpower planning.
  3. Study of die lay-out ,die design checking and improvement.
  4. Co-ordination with Machining, Design & CAM team for die manufacturing, inspection & trials.
  5. Co-ordination with customer and stakeholders.
  6. Die assembly, spotting, trial and proving at customer end.
  7. Panel inspection and accuracy/quality improvement.
  8. High tensile dies manufacturing.
  9. Panel deformation & compensation correction.

HPDC dies/ Injection mold dies Machining Shop Supervisor

Job ID
18253

Job Type
Full-time

Location
Gurugram, Manesar

Experience
5 – 9 Years

Business Unit
Production Business Verticle

Organization
PLSFHR

Job Posted Date
September 3rd 2021

Job Description
1) Shift supervisors for handling of CNC machining operations (A, B and C shifts).
2) Manpower handling at shop floor level (operator level).
3) Machining schedule planning and monitoring.
4) Machining feasibility of dies – Drawing study & checking.
5) Coordination with design, fitting and quality team for die machining.
6) Machining capacity planning.
7) Work content sheet and inspection sheet preparation.
8) New Tooling trial.
9) Tooling inventory management.
10) Die parts quality monitoring with PDCA approach.
11) Target vs. Actual machining Hours analysis with die machining hours reduction.
12) Machining efficiency improvement.

CNC Machining and Operation Supervisor (Press Dies)

Job ID
18252

Job Type
Full-time

Location
Gurugram, Manesar

Experience
4 – 8 Years

Business Unit
Production Business Verticle

Organization
PLSFHR

Job Posted Date
September 3rd 2021

Job Description
Department: Tool Room and Die Shop

Division: Production Engineering

Education: Diploma (Tool and Die)

Level: Engineer

Job Responsibilities

  1. Independent handling of CNC shift operations (A,B & C shifts).
  2. Manpower handling at operator level.
  3. Manufacturing process planning of die parts.
  4. Machining feasibility of dies – Drawing study & checking.
  5. Part completion as per timeline given by Shift in-charge.
  6. New Tooling trial.
  7. Tooling inventory management.
  8. Target vs. Actual analysis of machining Die hours and Utilization.
  9. Daily update of time sheet.
  10. Die parts Quality monitoring.

Competencies / Skills

  1. Good drawing reading skills & knowledge of Fits & Tolerances
  2. Knowledge of complete CNC operations
  3. Knowledge of FANUC CONTROLS
  4. Able to generate MACRO CNC programs
  5. Knowledge of various cutting Tools and clamping systems
  6. Knowledge of panel dies/ Die casting dies manufacturing
    (Preferably worked in dies development industry of automobile components)
  7. Able to make die machining process planning sheet independently
  8. Knowledge of different die materials
  9. Ability to take CNC machining operation decision independently
  10. Knowledge of CAM programming software
    (UG NX / POWERMILL) shall be given added advantage

Engineer/Senior Engineer – Metallurgical Testing & Analysis

Job ID
18227

Job Type
Full-time

Location
Gurugram

Experience
4 – 9 Years

Business Unit
Engineering

Organization
E-HR

Job Posted Date
September 2nd 2021

Job Description Role
Metallurgical Testing and Analysis

Responsibility

  1. Metallurgical/Mechanical testing like, Hardness, Material Test, Tensile Strength, Microstructure analysis etc.
  2. Test Report preparation and documentation.
  3. Operation and documentation as per ISO9001 & ISO17025.
  4. Timely AMC & Calibration of Lab equipment.
  5. Spares & Consumables monitoring
  6. Equipment break down monitoring

Competency Requirements

  1. Technical/Functional
    1.1 Well versed with technical material standards (ISO, JIS, DIN, IS) related to lab testing
    1.2 Basic knowledge of Raw Materials specific to automobiles.
    1.3 Basic knowledge of Casting/Forging/Heat Treatment/Welding Processes.
    1.4 Basic MS Office operations (esp. MS Excel)
  2. Special Expertise
    2.1 Having experience in Automobile or related Industry or manufacturing Institute/Lab
    2.2 Preferable experience in Metallurgical/Mechanical testing (Casting/Forging/Heat Treated parts)
    2.3 Hands-on working experience on Testing/Analytical equipment like Hardness Testers, UTM, 2.4 Spectrometer, Sample preparation equipment etc.

Educational Requirement
Diploma (Metallurgy/ Mechanical ) – Full Time

Engineer/Senior Engineer – Quality Assurance (Parts Quality) – Electrical & Electronic Parts

Job ID
18226

Job Type
Full-time

Location
Gurugram, Manesar

Experience
5 – 9 Years

Business Unit
Engineering

Organization
E-HR

Job Posted Date
September 2nd 2021

Role
Development of Electrical Parts through Zero defect approach

Responsibility

  1. Quality improvement initiatives at vendors
  2. Vendor process change evaluation and approval

Competency Requirement

Technical/Functional

  1. Functional knowledge of Performance parameters of Electrical & Electronics parts
  2. In depth knowledge of layouting, routing, manufacturing, and best practices in Wiring harness industry.
  3. Good understanding of Electrical & Electronics circuits & drawings.
  4. Should be proficient in system circuit for quick troubleshooting.
  5. Knowledge of Electrical & Electronics parts testing & applicable standards ( IS / JIS / JASO / DIN Etc)
  6. Analysis and root cause identification of Quality issues of Auto Electrical & Electronics parts.
  7. Practical application of Quality Control Tools, including theoretical background of SPC, Analytical Tools, 5Why, 8D, FTA ,Six sigma etc…
  8. Working Knowledge of Tools / Dies & various inspection aids (gauges /Jigs / Fixtures / Test Rigs, Etc).

Educational Qualification
Degree/Diploma in Electrical/ Electronics Engineering.

Engineer/Senior Engineer – Quality Assurance (Parts Quality) – Interior & Exterior Plastic

Job ID
18225

Job Type
Full-time

Location
Gurugram, Manesar

Experience
5 – 9 Years

Business Unit
Engineering

Organization
E-HR

Job Posted Date
September 2nd 2021

Role
Development of Plastic parts through zero defect approach

Responsibility

  1. Quality Problem solving in vendor supplied parts
  2. Quality improvement initiatives at vendors
  3. Vendor process change evaluation and approval

Competency Requirements

Technical/Functional

  1. Functional knowledge of Performance parameters & testing methods of Interior & Exterior Plastic parts.
  2. Practical application of Quality Control Tools, including theoretical background of PFMEA ,SPC, Analytical tools 8D, FTA and Six sigma etc..
  3. New product Development (Plastic Part manufacturing, Tool development, Injection molding Process understanding)
  4. Handling Mass Production Parts Quality
  5. Knowledge of JIGs and Fixtures , Injection molding and plastic molds
  6. Ability to Conceptualize Checking fixtures and gauges along with Working Knowledge of various inspection tools, gauges and test rigs

Educational Qualification
Degree/Diploma in Mechanical / Polymer Engineering

Assistant/Deputy Manager – Management & Control Engineer (Substance of Concern)

Private Jobs (Sep2021) in Maruti Suzuki Ind Ltd

Job ID
18230

Job Type
Full-time

Location
Gurugram

Experience
3 – 7 Years

Business Unit
Engineering

Organization
E-HR

Job Posted Date
September 2nd 2021

Role:
SOC Control to meet Environment Regulations

Responsibility:

  1. Ensure RRR & SOC Compliance in vehicles
  2. Manage International Material Data System (IMDS)
  3. Ensure timely IMDS Data Collection, Verification & Analysis.
  4. Perform RRR Calculations for vehicle SOP
  5. Awareness & Training to Suppliers and Inhouse for SOC Management
  6. Monitor Upcoming Environment Regulations
  7. Perform inhouse testing of SOCs and enhance SOC testing capability

Competency Requirement:

  1. Technical/Functional:
    1.1 Well versed with technical material standards (ISO, JIS, DIN, IS) related to lab testing
    1.2 Basic knowledge of Raw Materials specific to automobiles
    1.3 Basic MS Office operations (esp. MS Excel)

Specific Expertise:
Having experience in Automobile or related Industry or manufacturing or Research Institute/Lab
Experience in testing of substances of concern (e.g. heavy metals, POPs etc.)
Preferable experience in SOC monitoring tools like IMDS
Hands-on working experience on analytical equipments like XRD, ICP, ED-XRF, optical microscope (preferably polarized light microscope), GCMS/HPLC/LCMS & result interpretation

Educational Qualification:

B.E / Btech (Chemical / Polymer / Plastic / Environment/ Metallurgy/ Mechanical ) – Full Time

Assistant/Deputy Manager – New Model Development (Quality Assurance) – Rohtak

Private Jobs (Sep2021) in Maruti Suzuki Ind Ltd

Job ID
18224

Job Type
Full-time

Location
Rohtak

Experience
3 – 7 Years

Business Unit
Engineering

Organization
E-HR

Job Posted Date
September 2nd 2021

Role
New model test in charge.

Responsibility

  1. Plan and execute vehicle level tests on road/tracks and Chassis Dyno.
  2. Capturing of test results, Root cause analysis of failures in vehicle systems i.e. Engine, Power Train, Suspension, Electricals and other parts
  3. Ensuring countermeasure implementation in New Models

Competency Requirements:

Technical/Functinal

  1. Knowledge of vehicle system functioning, designs and benchmarking activity.
  2. Knowledge of instrumentation setup on vehicles, data logging and test results analysis.
  3. Knowledge of upcoming new technologies/ regulations in vehicle systems

Behavioral

  1. Excellent coordination skills to work with diverse internal and external team members.
  2. Strong Clear communication & presentation skills.
  3. Keen on taking initiatives and quick decision making

Educational Qualification
BE / B.Tech. Mechanical /Electrical /Electronics (Engineering from reputed colleges)

Deputy Manager – Market Quality (Petrol Engine)

Job ID
18218

Job Type
Full-time

Location
Gurugram, Manesar

Experience
3 – 7 Years

Business Unit
Engineering

Organization
E-HR

Job Posted Date
September 2nd 2021

ROLE
HANDLING OF MARKET FEEDBACK AND WARRANTY ISSUES RELATED TO ENGINE COMPONENTS
FASTER ANALYSIS AND EXECUTION OF QUALITY IMPROVEMENT PROJECTS BASED ON MARKET FEEDBACK

RESPONSIBILITY
FTA APPROACH FOR SOLVING COMPLEX MARKET ISSUES
FAILURE REAPPERANCE / SIMULATION AND UP TO CHILD PART LEVEL ANALYSIS.
COMPETITOR PROCESS / DESIGN BENCHMARKING.
HANDLING CUSTOMER COMPLAINTS FOR DEFECT UNDERSTANDING & DIAGNOSI

COMPETENCY REQUIRED

TECHNICAL/FUNCTIONAL
STRONG KNOWLEDGE OF PRODUCTION PROCESS OF ENGINE COMPONENTS
STRONG KNOWLEDGE OF QC TOOLS, DOE, SIX SIGMA
ANALYTICAL SKILLS AND LOGICAL APPROACH TOWARDS PROBLEM SOLVING
STRONG KNOWLEDGE OF MS OFFICE TOOLS (EXCEL, POWERPOINT ETC.)
STRONG EXECUTION, ORIENTATION AND PROBLEM-SOLVING APPROACH
ABILITY TO ANALYZE THE DATA AND PROPOSE SOLUTION & FUTURE STRATEGIES.

BEHAVIORAL
STRONG COMMUNICATION & PRESENTATION SKILLS
ABILITY TO WORK WITHIN STRICT TIMELINES
TEAM PLAYER WITH STRONG NETWORKING SKILLS

EDUCATIONAL QUALIFICATION
DEGREE IN MECHANICAL/AUTOMOBILE ENGINEERING FROM A REPUTED INSTITUTION

Private Jobs (Sep2021) in Maruti Suzuki Ind Ltd

Beware of Fraudulent Recruiting : Maruti Suzuli employees will not call any candidates towards Job Offer or Job assistance. Maruti Suzuki will never charge any candidates for Jobs. Please be aware of fraudulent calls or emails.

You may also like this…

By Aditya

Hi, I’m Aditya Sharma, a professional blogger from Gurgaon, India and I launched this blog called aadityacademy on July 2021. aadityacademy.com is a mechanical Project-oriented platform run by Aditya sharma and I got the motivation to start aadityacademy blog after seeing less technical education information available on google.

Leave a Reply

Your email address will not be published. Required fields are marked *